View all press releases

    October 26, 2011
    HOLDING TIGHT: Geofoam Offers Solid Solution for Retaining Walls

    Denver, CO - What do Myriad Genetics, the University of Arkansas, Biscuit Creek, and Grove Terrace have in common? Stabilization. Stabilization. Stabilization--using EPS Geofoam.

    Underlying each of these retaining wall projects was a problem that pointed to Geofoam as the material of choice. Whether your project presents a need to minimize lateral earth pressure on retaining walls, maintain a tight construction schedule, reconstruct a washed-out roadway, or mediate a faltering bridge abutment, Geofoam provides an incredibly lightweight material with enormous compressive strength and offers a time-saving alternative to traditional fill materials.

    What are the standout benefits of Geofoam? First and possibly foremost, is its weight. Geofoam weighs in at a whopping 1 to 2 pounds per cubic foot (16 to 32 kg per cubic meter), which is 100 times lighter than soil and 20 to 30 times lighter than other alternative lightweight fill materials. This extreme difference in unit weight, compared to other materials, makes EPS Geofoam an attractive fill material to significantly accelerate construction schedules.

    The University of Arkansas built a $22 million parking structure in the summer of 2009. The underground structure required a lightweight fill material to reduce lateral pressure on the below-grade walls. Making matters more urgent, Baldwin & Shell Construction was faced with an unusually tight schedule—and the firm wanted to deliver. Superintendent Morris Vines found that pre-construction meetings were tense. “The project staging area was limited and materials would have to be stored offsite. The project required 4000 cubic yards of geofoam—and there was no way we could store it at the site. Delivery would have to be staged—and we were concerned that we’d have some loss of time with multiple deliveries. ACH Foam Technologies, our geofoam supplier, was willing to deliver the geofoam in stages, and deliveries were prompt according to our schedule. That allowed us to come through on time, with a perfect installation,” said Vines.

    EPS Geofoam can be used as an embankment fill to reduce loads on underlying soils, or to build highways quickly without staged construction. It has been used to repair slope failures, reduce lateral load behind retaining structures, accelerate construction on fill for approach embankments and minimize differential settlement at bridge abutments.

    Such was the case of Biscuit Creek Bridge in Rudyard, Michigan. From August to November, 2010 the Sullivan Creek Road was closed while the new Biscuit Creek Bridge was being built. Near the completion of the project, the bridge abutment began showing signs of movement during backfill because of lateral loading due to the weight of the soil. Engineers requested that the soil backfill be removed to prevent further damage.

    Glen Haelka, the contractor, was skeptical when the idea of high density foam backfill was discussed as an alternative. “I thought, ‘no way’. But I was proven wrong. The compressive strength of the geofoam truly amazed me when, with only 30 inches of cover, we were able to use a 115,000 pound excavator on top of the foam and open the bridge to traffic in just three weeks.” Haelka Construction placed 353,920 board feet of ACH Foam Technologies’ Foam Control ® Geofoam as foundation stabilization fill for the remediation of the bridge without weather delays.

    Grove Terrace Road in Dubuque Iowa was in serious trouble in the spring of 2008. Heavy rains washed out the road’s retaining wall, leaving limestone blocks in the roadway below and prompting the closure of West 11th Street. Engineers had used geofoam in part of West 11th Street’s new construction and chose it again for the repair.

    The limestone blocks were restored and reused with 250 cubic yards of EPS 15 Geofoam as backfill, reducing lateral pressure on the remediated wall.

    Because geofoam weighs only 16 to 32 kilograms per cubic meter (1 to 2 lbs per cubic foot), large earthmoving equipment is not required for construction. After the blocks are delivered to the construction site, they can easily be trimmed to size and placed by hand. In areas where right-of-way is limited, geofoam can be constructed vertically and faced, unlike most other lightweight fill alternatives. It is also unaffected by adverse weather conditions.

    “Using geofoam to backfill against a vertical structure completely eliminates lateral pressure on that structure, whether it is a bridge abutment, retaining wall, or foundation wall,” said Terry Meier, geofoam specialist for ACH Foam Technologies. “For example, with a foundation wall going 30 feet below grade, the compacted soil will create 3750 lbs. of vertical pressure at the wall base and 1250 lbs. of lateral pressure at the base of the foundation wall. The use of geofoam will completely eliminate the lateral pressure and dramatically reduce vertical pressure.”

    Construction of the Myriad Genetics building in Salt Lake City began in the fall of 2009. Its retaining walls were built 20-30 feet below grade. Christopher Beckman of Applied Geotechnical Engineering chose EPS Geofoam for its high compressive strength and ability to reduce lateral pressure on the retaining walls. Beckman used geofoam as backfill behind the screen wall to reduce the lateral earth pressure on the screen wall and building perimeter wall. “The mass of geofoam will perform as expected, with little, if any, movement during the design seismic event,” explained Beckman.

    Geofoam has been used for seismic and utility protection fill, acting as a buffer between movements in subsoils and buried utilities or foundation walls. 7600 cubic feet of Foam Control Geofoam was used for the Myriad Genetics project. Bradford Busath AIA, Associate Architectural Nexus, explained, “the use of Geofoam allows for the final grade to be maintained closer to the original—minimizing the impact to existing utilities.”


    About EPS Geofoam

    Foam-Control® EPS Geofoam is a cellular plastic material that is strong, but has a very low density – 1 percent of traditional earth materials. EPS Geofoam is produced in block form and is easily positioned at the work site. Foam-Control® EPS Geofoam is unaffected by normally occurring weather at the time of installation and will retain its physical properties under engineered conditions of use.

    Learn more about EPS Geofoam Case Studies & Projects.

    About ACH Foam Technologies

    For over four decades ACH Foam Technologies has been an industry leader in EPS manufacturing, providing products for construction, geotechnical, packaging, and industrial applications. With locations throughout the U.S., ACH is positioned to offer convenient, valuable, and complete solutions for its customers. ACH recycles 100% of its post-industrial EPS and is actively involved in recycling post-consumer EPS as well.

    Contact us for more information on ACH Foam Technologies and its products and services.